RME Babyface Pro FS Soundcard

RME Babyface Pro FS Soundcard

The RME Babyface Pro FS is a powerful, yet eminently portable, bus-powered USB audio interface. It features a rugged, low-profile housing with a clean look and easy-to-use interface. Benefit from reference-quality recording, thanks to two digitally controlled microphone preamps, while ample analog, digital, and MIDI connectivity makes integration with your studio easy. The Babyface Pro FS employs the same SteadyClock FS circuit as RME’s reference-quality ADI-2 Pro AD/DA converter, ensuring ultra-stable clocking, while a bevy of design improvements offers a huge performance boost over its predecessor. Enjoy a fully flexible 288-channel mixer with 46-bit internal resolution, courtesy of RME’s TotalMix FX engine, along with latency-free processing, including a 3-band EQ, low-cut filter, reverb, and echo. Clear-cut onboard metering rounds out this state-of-the-art audio interface’s impressive features. The RME Babyface Pro FS is USB-C compatible and comes with a premium plug-in bundle, plus USB-2 and USB-C cables. Specification ;

• Computer Connectivity: USB 2.0
• Form Factor: Desktop
• Simultaneous I/O: 4 x 4 (analog), 8 x 8 (digital)
• Number of Preamps: 2 x mic, 2 x instrument
• Phantom Power: Yes
• A/D Resolution: Up to 24-bit/192kHz
• Effects: Reverb, Delay (via TotalMix FX software)
• Analog Inputs: 2 x XLR (mic), 2 x 1/4" (Hi-Z/line)
• Analog Outputs: 2 x XLR (+4dBu/+19dBu)
• Digital Inputs: 1 x Optical Toslink (ADAT, S/PDIF)
• Digital Outputs: 1 x Optical Toslink (ADAT, S/PDIF)
• Headphones: 1 x 1/4", 1 x 1/8"
• MIDI I/O: In/Out (via breakout cable)
• USB: 1 x Type B
• Software: RME TotalMix FX, Total Mix Remote (iOS, Mac, PC), Brainworx Plug-ins, Scuffham S-Gear
• Amp Collection
• Compatibility: iOS, Mac, PC
• OS Requirements - Mac: OS X 10.9 or later
• OS Requirements - PC: Windows 7 SP1 or later
• Bus Powered: Yes
• Power Supply: 12V DC power supply / USB bus powered
• Height: 1.4"
• Width: 4.25"
• Depth: 7.1"
• Weight: 1.5 lbs.

key Feature :

• 12-in/12-out portable USB 2.0 audio interface
• Rugged, low-profile housing has a great clean look but still offers deep control
• 2 digitally controlled microphone preamps enable reference-quality recording
• Ample analog, digital, and MIDI connectivity makes integration with your studio easy
• SteadyClock/femtosecond technology yields ultra-stable clocking
• Eclipses the performance of its predecessor, thanks to a bevy of design improvements
• TotalMix FX gives you a fully flexible 288-channel mixer with 46-bit internal resolution
• Each channel boasts latency-free processing, including a 3-band EQ, low-cut filter, reverb, and echo
• Onboard metering with peak and RMS calculation for keeping an eye on your levels
• Mic stand thread on the bottom for free positioning
• Bus-powered for easy portability
• USB-C compatible — USB-2 and USB-C cables are included
• Includes a premium plug-in bundle with Scuffham S-Gear, Brainworx bx_opto, and Brainworx bx_masterdesk, plus
• trial versions of Modartt Pianoteq 6, GG Audio Blue 3 Organ, and Gig Performer

New Features over Previous Babyface Pro ;

• +19/+4 dBu switch on the bottom adds a direct way to reduce the output level, improving SNR for sensitive active monitors, as well as avoiding distortion/overloads, and keeping TotalMix FX faders near 0 dB instead of high attenuations
• Full SteadyClock FS circuit for ultralow jitter and high jitter immunity
• 3.5 mm TRS phones output power rises from 70 mW to 90 mW
• THD of both phones outputs improved by up to 10 dB
• Uses same output opamps as ADI-2 Pro
• Output impedance of 3.5 mm TRS lowered from 2 to 0.1 ohm
• Mic inputs SNR improved from 112.2 to 113.7 dB
• TRS line inputs SNR improved from 114 to 116 dB RMS (120 dBA)
• THD line inputs improved by 8 dB
• Latency improved by six samples on the AD side by new ADC (5 samples AD, 7 samples DA)
• No increase in power consumption, despite new features
• K-slot for theft protection