No products in the cart.
Roll over image to zoom in
Click to open expanded view
Xiaomi Mi Powerbank PRO 10000mAh
Xiaomi Mi Powerbank PRO 10000mAh Quick Charge Power Bank External Battery Type-C Portable Bateria External Portable Charger
- Type: Emergency / Portable
- XiaoMi Model: PLM03ZM
- Quality Certification: BSMI,ce,FCC
- Support Quick Charge Technology: Two-way Quick Charge
- Brand Name: Xiaomi
- Battery Capacity(mAh): 9001-10000mAh
- Battery Type: Li-polymer Battery
- Supports Solar Energy: No
- Input Interface: Micro USB
- Output: 12V/1.5A
- Output Interface: Type C
- Is LED Lamp Illumination: No
- Weight: 223g
- Size: 128.5x75x12.6 mm
- Model: PLM03ZM
- Battery type: Li-polymer Battery
- Input voltage: 12V / 9V / 5V
- Output voltage: 12V / 9V / 5V
- Capacity: Min 10000mAh / 38.5Wh
- Charging time: 3.5 hours-18W 5.5 hours -10W
- Size: Max 128.5x75x12.6 mm
- Package: Power bank x 1, user manual x 1, Type-C cable x 1
- Input current: 12V 1.5A / 9V 2A / 5V 2A
- Output current: 12V 1.5A / 9V 2A / 5V 2.4A
Xiaomi Power Bank 2 10000mAh 20000mAh Mi Powerbank External Battery Micro USB Portable Bateria Externa Portable Charger
Model: PLM03ZM (10000mha）
Battery type: Li-polymer Battery
Input voltage:12V / 9V / 5V
Output voltage： 12V / 9V / 5V
Input current: 12V 1.5A / 9V 2A / 5V 2A ( TYP )
Output current: 12V 1.5A / 9V 2A / 5V 2.4A ( TYP )
Rated capacity: 10000mAh / 38.5Wh（Min）
Charging time: About 3.5 hours (18 w charger *, standard cable) is about 5.5 hours (10 w charger *, standard cable)
Size: 128.5x75x12.6 mm ( Max )
Package:Power bank x 1, user manual x 1, Type-C cable x 1
Load test :automatic test load insert and pull out
Safety protection: input voltage protection, input the counter-attack protection, output over-current protection and output over-voltage protection, output short circuit protection, battery charge discharge protection, charging/discharging
Temperature protection protection recovery use charger for action, can restore
Charging temperature 0 ℃ – 45 ℃ (TYP)
Discharge temperature output temperature: – 20 ℃ ~ + 60 ℃ (TYP)
* 18 w charger is refers to the output on the market support for DC5.0 V / 12 V / 2.0 A 2.0 V / 2.0 A 1.5 A charger.
* 10 w charger on market refers to support for the output of A DC5.0 V / 2.0 A charger.
* the above data are for brown rice laboratory measurements, but due to the objective environment change, the data will have different or error.Figure 5 devices used in millet, need to connect the Micro USB to Type – C adapter to recharge properly used.
Xiaomi Power Bank PRO (10000mAh)
Support Type – C | high-density charging and discharging lithium polymer batteries two-way quick charge | | is only 12.58 mm thin
1. Micro – USB/Type – C Through with the power supply with Micro – USB/Type – C in one cable, recharge millet 5 or new MacBook at the same time, the support Type – C charger can also be directly for the mobile power supply.
2..12.58mm Thickness than the classic 10000 mah power bank decreased by 42% than 5000 mah only 2.68 mm thick 3..Two-way 18W quick charge Thickness than the classic 10000 mah power bank decreased by 42% than 5000 mah only 2.68 mm thick 4..Freely, support small current charging Double click on the button to open 2 hours after small current charging mode can recharge bluetooth headset, mi bracelet.Don’t have to worry that can’t be used to recharge the small current equipment. 5..High density lithium polymer batteries Adopt from ATL/lishen supplier original lithium polymer batteries, with up to 10000 mah battery, provide your mobile phone, tablet, digital camera battery life beyond imagination.
6..High-quality circuit protection chip using Texas Instruments / purple rice custom charge and discharge chip. Not only to provide 9 heavy circuit protection, but also to enhance the overall charge and discharge efficiency. 7..Comprehensive optimization of charge and discharge efficiency is as high as 93% of the plate end conversion rate Advanced circuit chip not only safer, more can effectively improve the charge conversion, stable discharge voltage, and has high precision resistance capacity of the device. 8..CNC ornamental edge + secondary anodic process Improve the handle and the overall quality Based on aluminium metal surface treatment process on the basis of the original, close to the shell at both ends to increase CNC technology used in edge, and high polished on second anodization, visually presented two fine contour, improve the quality of the feeling at the same time also strengthened the feel! 9..All aluminum alloy shell CNC precision CNC machine tool cutting, a integrated metal shell.The structure of the ultra high strength, resistance to collision avoidance.Surface more can prevent sweat corrosion resistance, suitable for carrying.Arc edge accord with human body engineering, compared to common product of angular edge to edge, easier to one hand grip.Secondary anodic oxidation
- Arc edge accord with human body engineering, compared to common product of angular edge to edge, easier to one hand grip.
- Secondary anodic oxidation process Based on previous strict technological process, use of twice anodic oxidation, can form hard protective layer at the surface, no fading, more wear-resisting corrosion resistance
- Hidden button A little buttons on concave, could not see, but with a touch.
12V / 9V / 5V
Sorry no more offers available